Suchergebnisse

…ay to find out if it can be performed with your computer if you don't know if it runs at 16 or 32Mhz. you'll just need to get and run a tool called "cent …higher speeds or to get an FPU that even works at higher clockrates (FN50) if socketed, alternatively.

…hesitate to comment if you can think of other interesting informations, or if you think that some information should not be available.

# Listen: If you have multiple interfaces this allows you to bind to # only one. If this is commented out, tinyproxy will bind to all

…vely easy, please note that it still requires some electronics experience. If you’re unsure, please ask a person that can help you with the installatio 1. If not already done: Install a DIL 64 socket.

If only one memory module is used, please insert this into slot A (= SIMM A). If two modules of different sizes are used, the larger module must be plugged

…tions and disconnections. They can becom loose and cause contact problems. If that happens, an intermediate socket or ''cautious'' bending of the pins be …of the drivers installed on your computer keeping the order is very easy, if you simply copy the new files to the AUTO

…nd Lightning ST will fit even into the little space available on some STs. If you prefer, the Cloudy will also work on top of the Lightning ST, though. …s with six ROMs can also be re-configured for 1 Mbit ROMs. Inquire with us if you plan to use TOS 1.0x in the Cloudy and are unsure about the capabilitie

If you have a novice skill, please ask a competence person for help!''' * If the increasing of speed doesn’t work inside of your TT, you don’t have

If you are sitting in front of the TT, you should be able to read on the top… If everything works correctly, it looks like this under TOS 3.06 (here with No

…ffers the possibility to connect IDE devices to the Atari TT. It is equal, if you use a hard drive, a CD-ROM or a CF card. Usable master / slave IDE to… …ossible. Thunder with older firmware versions do not need firmware update, if there were so far no problems.

IF j>=abh AND j<abh+hs IF i>=abv AND i<abv+vs