Nova (VME)

Aus Atari Wiki-NEU
Zur Navigation springenZur Suche springen

(Diesen Text habe ich erstmal ganz frech von verschiedenen Quellen geklaut. So nach und nach werde ich den ins deutsch übersetzen)

Nova Grafikkarte am Atari TT

Die Nova Grafikkarte wird über einen Nova-Adapter (VME-BUS zu ISA-BUS Adapter) angeschlossen. Bei den erhältichen Nova-Grafikkarte handelt es sich um ganz gewöhnliche PC-ISA Grafikkarten wie die Tseng Labs ET4000, Ati Mach32 oder Ati Mach 64 für die ensprechende Atari VDI Grafiktreiber entwickelt wurden. Diese Karten hatten warem für damalige Verhältnisse konkurenzlos schnell einzig die Matrix TC1208 konnte hier mithalten. Wegen der maximalen 2MB Video-RAM mußte sie sich der Ati Mach64 mit 4MB Video-RAM, was maximale Farbtiefe bei hohen Auflösungen anging, aber geschlagen geben.

The Nova Graphic Card is a VME adapter to ISA connect. The one that I have is a VME to 16 bits ISA connect. There graphics card that comes with it is in several favours - these can be the Tseng ET4000 series or the ATI MACH series. As I have a Tseng card, the tips will be concentrated on the Tseng chipset graphics cards, on the TT.

Die Grafikchips

Hw-et4000w32.jpg
Eine ET4000/W32 Karte

Es gibt mindesten zwei Varianten der Tseng Grafikkarten (möglicher Weise auch mehr). Zum einen die ET4000 zum anderen die ET400/W32. Beide benötigen unterschiedliche Nova-Treiber und je nach Atari Maschine auch verschiedene Treiber (Atari Mega STE oder Atari TT). Zum identifizieren list man die Typenbezeichnung direkt vom Grafikchip. Der ET4000 kann max. 1MB Video-RAM adressieren der ET4000/W32 kann dagegen bis zu max. 4MB Video-RAM adressieren. Das Foto zeigt eine ET4000/W32 Karte die mit bis zu 2MB Video-RAM bestückt werden kann aber momentan nur mit 1MB bestückt ist.

Die Steckbrücke (Jumper) auf der Nova-Platine

Die Steckbrücke ist auf MSTE zu setzen. Wird sie auf TT gesetzt dann bleibt der Bildschirm leer,

Die Auto-Ordnerreihenfolge der Treiber

Die Programme sind in folgender Reihenfolge in den Auto-Ordner zu kopieren:

1. EMULATOR.PRG Diese Programm schltet die Videoausgabe auf die Grafikkarte um. Die VGA-Ausgabe erfolgt in niedrieger Auflösung und in sw.

2.MENU.PRG Diese Programm ermöglicht die Auswahl von Videoauflösung, Farbtiefe und anderen Einstellungen. Eine bessere Altenative zum MENU.PRG ist XMENU.PRG welches auch direkt gestrtet werden kann.

3. STA_VDI.PRG Dieses Programm ist das NOVA-VDI welches erlaubt höhere Auflösungen und Farbtiefen zu verwenden.

MENU configurations

It is important to make the configuration for the Nova VDI by using the MENU.PRG. To force the MENU program to run, just remove the MENU.INF file, and run from the desktop. The program can be run from the standard Atari screen (ie the Nova need not to be running to run this program).

1. Select the reolution for the desktop A list of screen resolutions will be available for selection. Select the one that suit you most. Take note of the display refresh rate, as selecting one that is outside your monitor will force your monitor to complain. The resolutions are taken from STA_VDI.BIB file.
2. Select the VDI output There is a possibility to select the output to either the standard atari VDI output or the Nova VDI output. The Nova VDI output is called VGA.
  • Select either VGA with or without GDOS will force the use of the Nova VDI.
  • Select either Atari standard with or without GDOS will force the use of normal Atari VDI.

Note: Default seems to be the Atari standard which does not understand the higher resolutions and colours. This forces the video output to be low resolution and in mono.

3. Select the menu display method If the MENU.INF file is found, the MENU.PRG will silently not display the menu.You select the method to force the menu to be display -- by different key presses or display by seconds.
4. Enter name of the GDOS program Normally this will be GDOS.PRG, NVDI.PRG or SPDGDOS.PRG. May be others out there but I do not know.
5. Save the settings. This produces the MENU.INF file.

That's It.

On your next reboot, the high resolution and high colours should be on your monitor.

Special thanks to Gerhard Huber of Computerinsel GmbH, who provide much inputs and the drivers for setting up the Nova on my TT.

Have Fun!!

NOVA VDI

Q4: NVDI does not boot with the NOVA VDI

A: Three conditions are required for this to work: You need the NOVA VDI v2.61 or later All NVDIDRV?.SYS must be disabled (change their extensions to ".SYX") The AUTO folder order must be: EMULATOR.PRG, STA_VDI.PRG, MENU.PRG, NVDI.PRG, WDIALOG.PRG.

Q5: The combination NVDI + NOVA VDI + MagiC does not boot. But it does work without MagiC.

A: Check the following:The AUTO folder order must be maintained as in Q4; use AUTOEXEC.BAT if nescessary. The line #_DEV must be present to get "meaningful" results; for example: #_DEV 4 0

Q26:Using Jinnee on a NOVA graphic card tranparent moving of icons does not work.

A: In the NVDI 5 version dated before 1/6/98 could not detect the presence of raster functions on the NOVA card. Use a version of NVDI5 dated 1/6/98 (or later).

Q27: Jinnee notes are not transparent when moved on a system with a NOVA graphic card (a white block is being movewd instead).

A: NVDI had problems with OffScreenbitmaps, that were derived from the NOVA display driver (when a defined format is passed, as in Papillon 3, no problems). This problem occurred in combination with NOVA cards, Jinnee, CAB and the Calamus module FRANKLIN. Update to a NVDI 5 dated 28/6/98 (or later) if you have this problem.